China best Conveyor System for The Pulleys Manufacturers Direct Supply pulley system

Product Description

 

 

 

Product Description

Drive pulley
The driving drum is the main component of transmitting power.

Dt-ii drive drum according to the load capacity is divided into light, medium and heavy 3 types, drum diameter of 500, 630, 800, 1000mm. with

A roller has several different shaft diameters and center spans for selection.

1) Light: bearing aperture is 80 ~ 100mm, shaft and wheel hub are single key connection, drum is a single plate welded structure, one-way shaft.

2) Medium: bearing aperture is 120 ~ 180mm, shaft and hub are single key connection, there are 2 kinds of one-way and two-way exit shaft

3) Heavy duty: bearing aperture is 200 ~ 220mm, expansion sleeve connection is cast welding cylinder structure.

The surface of the roller is covered with smooth steel, herringbone and CHINAMFG pattern rubber. Herringbone pattern rubber surface friction number, good drainage, but directional,

When installing the herringbone tip should be consistent with the conveyor belt running direction. The conveyor running in both directions should use a CHINAMFG pattern. For important occasions, be sure to Coated with vulcanized rubber; For flame-retardant, flameproof occasions should be used corresponding explosion-proof. Bearing seats are all lubricated with oil cup grease.

Bend pulley

It is used to change the running direction of the conveyor belt or increase the wrapping Angle of the conveyor belt on the transmission drum, and its structural form is divided into light, medium and heavy

Three types, the shaft of the grade diameter of 50 ~ 100mm,120 ~ 180mm and 200 ~ 260mm, the surface of the drum has bare light

Steel surface and smooth rubber surface two.

Drive device: by motor, reducer, high speed shaft coupling or hydraulic coupling, brake, low speed shaft coupling and backstop composed of drive single

The yuan is fixed on the drive frame, and the drive frame is fixed on the foundation.

 

Detailed Photos

Product Parameters

Certifications

Packaging & Shipping

Installation Instructions

Drive pulley and Bend pulley

(1) The roller should check the grease in the bearing seat before installation to ensure that the bearing is filled with lithium grease and the bearing seat is filled with grease

The amount 2/3 of the empty fat volume.

(2) When the transmission drum is a chevron groove surface, pay attention to the direction of the groove should be consistent with the running direction of the conveyor belt to prevent transmission

The conveyor runs off, and is conducive to trench drainage and sewage.

(3) Necessary protective measures shall be taken in the hoisting process, and the rubber surface of the roller shall not be damaged.

(4) During installation, the roller can be adjusted by adding gaskets under the cylinder bearing seat and adjusting screws on the frame

The cylinder position ensures that the axis and center first conform to the formula range listed in Table 14.


 

Company Profile

HangZhou CHINAMFG Intelligent Conveying System Co.,Ltd (abbreviated as CHINAMFG Intelligent) is the High-end Conveying Equipment brand , with excellent technical team and in house intellectual property & national patents,developing intelligent conveying machinery. Focusing on transforming itself into international competitive one-station solution provider of intelligent conveying system, providing not only intelligent products but also whole cycle management from construction to operation & service for our customers.Our company located in HangZhou city in North China Plain, it’s the cross road of ZheJiang ,ZheJiang and ZheJiang . We have more than 800 units advanced manufacturing equipments, including 20 large and main units and 3 automatic production lines. The factory covers 253,000 square meters. It’s registered capital is 71,550,00 USD, There are more than 300 employees which contains 30 with middle-level titles and 125 technical workers with high technical skills. Xinriseng is mainly engaged in the manufacture, sales and technical services of belt conveyors, large angle belt conveyors, horizontal curved belt conveyors and long distance crossing conveyors. Our products can be used in metallurgy, building materials, electric power, coal, port and other industries, products have been covered the whole domestic market, and exported to the United States, Germany, France and other EU countries, Australia, Brazil, along the Belt and Road countries, Southeast Asian countries and African emerging markets, totally more than 50 countries, gained the customers’ praise.Our company has a number of provincial innovative platforms, relying on the technological radiation, constantly strengthens exchanges and cooperation with scientific research institutes. We have successively formed school-enterprise partnerships with China University of Mining, ZheJiang University, ZheJiang Materials Handling Research Institute, HangZhou University of Architecture and Technology, keeping the conveyor design at the leading level in China. At the same time, our technical team regularly carries out technical exchanges and discussions with foreign companies, learning international leading design concepts and process methods, and keeps pace with international new technologies.With the innovative technology, good quality, CHINAMFG has established a one-stop service system. We will continue adhering to “servingthe users, making contributions to society”, make our company a flagship of conveying industry with international competitiveness. All in all, our company will provide the best products with high quality and competitive price for our customers and share success with you together.

 

 

Certification: CE, ISO
Pulley Sizes: Type F
Manufacturing Process: Casting
Material: Carbon Steel
Surface Treatment: Polishing
Application: Chemical Industry, Grain Transport, Mining Transport, Power Plant
Customization:
Available

|

Customized Request

grooved pulley

Can grooved pulleys be used in DIY projects and home improvement tasks?

Yes, grooved pulleys can be used in DIY (do-it-yourself) projects and home improvement tasks to enhance functionality, create mechanical systems, or improve efficiency. Here are some examples of how grooved pulleys can be utilized in DIY and home improvement applications:

1. Mechanical Systems:

– DIY Conveyor Belt: Grooved pulleys can be used to create a small-scale conveyor belt system for moving objects or materials within a DIY workshop or project. By attaching grooved pulleys to a frame and threading a compatible belt, you can easily transport items from one location to another.

– Garage Door Opener: Grooved pulleys can be employed in DIY garage door opener systems. By integrating grooved pulleys with a motorized mechanism and a timing belt, you can create a simple and efficient way to open and close your garage door.

2. Mechanical Advantage:

– DIY Block and Tackle System: Grooved pulleys can be utilized in a block and tackle system to create a mechanical advantage for lifting heavy objects. By arranging multiple grooved pulleys and a rope or cable, you can reduce the amount of force required to lift or lower objects, making it easier to handle loads in DIY projects or home renovations.

3. Home Appliances:

– DIY Clothesline: Grooved pulleys can be incorporated into a DIY clothesline system. By installing grooved pulleys at appropriate locations and using a durable rope or line, you can create a convenient method for hanging and drying clothes outdoors.

– Window Blinds or Curtains: Grooved pulleys can be employed in DIY window blinds or curtain systems. By attaching grooved pulleys to the window frame and threading a cord or chain, you can create a mechanism to easily raise or lower blinds or curtains, providing privacy and light control.

4. Exercise Equipment:

– DIY Pulley System for Strength Training: Grooved pulleys can be used in DIY pulley systems for strength training or rehabilitation exercises. By mounting grooved pulleys to a sturdy frame and using cables or ropes with handles, you can create a versatile and adjustable resistance training system at home.

5. Art Installations:

– Kinetic Sculptures: Grooved pulleys can be incorporated into DIY kinetic sculptures or interactive installations. By utilizing grooved pulleys with various diameters and attaching them to movable components, you can create visually appealing and dynamic artworks that respond to external forces or user interaction.

When using grooved pulleys in DIY projects and home improvement tasks, it is essential to ensure proper installation, alignment, and tension of the belts or ropes. Additionally, always prioritize safety by following best practices, using appropriate materials, and considering weight limits and load-bearing capacities.

By leveraging grooved pulleys in DIY projects and home improvement tasks, you can add functionality, mechanical advantage, and efficiency to your creations and make your home projects more enjoyable and rewarding.

grooved pulley

How are grooved pulleys customized for specific machinery and equipment?

Grooved pulleys can be customized to meet the specific requirements of different machinery and equipment. Here’s a detailed explanation of the customization process for grooved pulleys:

1. Design Considerations:

The customization process begins with understanding the specific needs of the machinery or equipment where the grooved pulley will be installed. Factors such as power transmission requirements, belt type, speed, load, and space limitations are taken into consideration. Design engineers work closely with the equipment manufacturer or end-user to gather all the necessary information and specifications.

2. Groove Shape and Size:

Based on the design considerations, the appropriate groove shape and size are selected. Grooved pulleys typically have V-shaped grooves, but the angle and dimensions of the grooves can vary. The groove shape and size should match the corresponding belt type and ensure optimal belt grip, alignment, and load distribution. The depth and width of the grooves are determined based on the belt dimensions and the desired power transmission capabilities.

3. Material Selection:

The choice of material for the grooved pulley depends on factors such as the operating environment, load requirements, and durability expectations. Common materials used for grooved pulleys include steel, cast iron, aluminum, and various types of plastics. The material selection ensures that the pulley can withstand the forces and stresses encountered during operation and provides the necessary strength and longevity.

4. Machining or Casting:

Once the design and material selection are finalized, the grooved pulley is manufactured through machining or casting processes. Machining involves using lathes, milling machines, or CNC equipment to shape the pulley from a solid block or bar of the chosen material. Casting, on the other hand, involves creating a mold of the pulley shape and pouring molten metal into the mold to form the pulley.

5. Groove Machining:

The grooves are machined into the pulley surface using specialized cutting tools or CNC machining. The groove dimensions and shape are precisely created to match the specifications determined earlier in the design phase. The groove machining process ensures that the pulley provides the desired belt traction, alignment, and load distribution characteristics for the specific application.

6. Surface Treatment:

Depending on the application requirements, the grooved pulley may undergo surface treatments to enhance its performance. Surface treatments can include coatings, such as plating or painting, to provide corrosion resistance or improve friction characteristics. These treatments help protect the pulley from environmental factors and optimize its interaction with the belt.

7. Quality Control:

Before the grooved pulley is ready for installation, it undergoes rigorous quality control measures. This includes dimensional inspections to ensure that the groove dimensions and overall pulley specifications meet the required tolerances. The pulley may also be subjected to load testing or dynamic balancing to verify its performance under operating conditions.

8. Installation and Integration:

Once the customized grooved pulley passes quality control, it is installed in the specific machinery or equipment for which it was designed. Proper installation techniques are followed to ensure correct alignment, tensioning, and belt tracking. The grooved pulley is integrated into the power transmission system, and adjustments may be made to optimize the overall system performance.

In summary, grooved pulleys are customized for specific machinery and equipment through a thorough design process that considers various factors such as design requirements, groove shape and size, material selection, and manufacturing techniques. The customization ensures that the grooved pulley provides the desired belt traction, alignment, and load distribution characteristics, ultimately contributing to the efficient and reliable operation of the machinery or equipment.

grooved pulley

What are the benefits of using grooved pulleys in various systems?

Grooved pulleys, also known as V-groove pulleys, offer several benefits when used in various systems. Here’s a detailed explanation of the advantages of using grooved pulleys:

1. Efficient Power Transmission:

Grooved pulleys contribute to efficient power transmission by providing increased belt traction. The V-shaped grooves in the pulleys create multiple contact points with the belt, improving the grip and minimizing slippage. This enhanced traction ensures reliable power transfer without loss due to slipping, resulting in efficient power transmission and optimal performance of the system.

2. Reduced Belt Wear:

The design of grooved pulleys helps to distribute the load more evenly across the belt’s surface. As a result, stress concentrations on specific points of the belt are minimized, reducing the risk of belt wear and prolonging its lifespan. By reducing belt wear, grooved pulleys contribute to lower maintenance costs and increased system reliability.

3. Belt Alignment and Tracking:

Grooved pulleys assist in maintaining proper belt alignment and tracking. The V-grooves guide the belt, keeping it centered on the pulley during operation. This alignment feature helps prevent belt wandering or slipping off the pulley, even under varying loads or conditions. Proper belt alignment and tracking result in smooth and consistent power transmission, minimizing energy losses and improving overall system efficiency.

4. Versatility and Compatibility:

Grooved pulleys are designed to be versatile and compatible with various belt types and sizes. They can accommodate different V-belts, V-ribbed belts, timing belts, or even flat belts, allowing for flexibility in selecting the appropriate pulley for specific power transmission requirements. This versatility ensures efficient power transmission across a wide range of applications and industries.

5. Vibration Damping:

Grooved pulleys contribute to vibration damping in power transmission systems. The V-grooves help dampen vibrations that can occur during power transmission, reducing the associated noise and potential damage to the system. By minimizing vibrations, grooved pulleys contribute to smoother operation and improved power transmission efficiency.

6. Cost-Effective Solution:

Using grooved pulleys can be a cost-effective solution for power transmission systems. The improved belt traction and reduced slippage provided by grooved pulleys minimize power loss, resulting in more efficient energy utilization. This can lead to cost savings in terms of reduced energy consumption and improved overall system performance.

7. Wide Range of Applications:

Grooved pulleys find applications in various industries and systems, including automotive, industrial machinery, HVAC, conveyor systems, and more. Their versatility and compatibility with different types of belts make them suitable for a wide range of power transmission requirements. Whether it’s transmitting power in an engine, driving a conveyor belt, or operating a ventilation system, grooved pulleys offer reliable and efficient performance.

In summary, the benefits of using grooved pulleys in various systems include efficient power transmission, reduced belt wear, belt alignment and tracking, versatility and compatibility, vibration damping, cost-effectiveness, and suitability for a wide range of applications. These advantages make grooved pulleys a preferred choice in many power transmission systems.

China best Conveyor System for The Pulleys Manufacturers Direct Supply   pulley system	China best Conveyor System for The Pulleys Manufacturers Direct Supply   pulley system
editor by CX

2023-10-02