China Best Sales Belt Conveyor Device Transmission Parts Pulley Manufacturers Direct Supply engine pulley

Product Description

 

Product Description

Drive pulley
The driving drum is the main component of transmitting power.

Dt-ii drive drum according to the load capacity is divided into light, medium and heavy 3 types, drum diameter of 500, 630, 800, 1000mm. with

A roller has several different shaft diameters and center spans for selection.

1) Light: bearing aperture is 80 ~ 100mm, shaft and wheel hub are single key connection, drum is a single plate welded structure, one-way shaft.

2) Medium: bearing aperture is 120 ~ 180mm, shaft and hub are single key connection, there are 2 kinds of one-way and two-way exit shaft

3) Heavy duty: bearing aperture is 200 ~ 220mm, expansion sleeve connection is cast welding cylinder structure.

The surface of the roller is covered with smooth steel, herringbone and CHINAMFG pattern rubber. Herringbone pattern rubber surface friction number, good drainage, but directional,

When installing the herringbone tip should be consistent with the conveyor belt running direction. The conveyor running in both directions should use a CHINAMFG pattern. For important occasions, be sure to Coated with vulcanized rubber; For flame-retardant, flameproof occasions should be used corresponding explosion-proof. Bearing seats are all lubricated with oil cup grease.

Bend pulley

It is used to change the running direction of the conveyor belt or increase the wrapping Angle of the conveyor belt on the transmission drum, and its structural form is divided into light, medium and heavy

Three types, the shaft of the grade diameter of 50 ~ 100mm,120 ~ 180mm and 200 ~ 260mm, the surface of the drum has bare light

Steel surface and smooth rubber surface two.

Drive device: by motor, reducer, high speed shaft coupling or hydraulic coupling, brake, low speed shaft coupling and backstop composed of drive single

The yuan is fixed on the drive frame, and the drive frame is fixed on the foundation.

 

Detailed Photos

Product Parameters

Certifications

Packaging & Shipping

Installation Instructions

Drive pulley and Bend pulley

(1) The roller should check the grease in the bearing seat before installation to ensure that the bearing is filled with lithium grease and the bearing seat is filled with grease

The amount 2/3 of the empty fat volume.

(2) When the transmission drum is a chevron groove surface, pay attention to the direction of the groove should be consistent with the running direction of the conveyor belt to prevent transmission

The conveyor runs off, and is conducive to trench drainage and sewage.

(3) Necessary protective measures shall be taken in the hoisting process, and the rubber surface of the roller shall not be damaged.

(4) During installation, the roller can be adjusted by adding gaskets under the cylinder bearing seat and adjusting screws on the frame

The cylinder position ensures that the axis and center first conform to the formula range listed in Table 14.


 

Company Profile

HangZhou CHINAMFG Intelligent Conveying System Co.,Ltd (abbreviated as CHINAMFG Intelligent) is the High-end Conveying Equipment brand , with excellent technical team and in house intellectual property & national patents,developing intelligent conveying machinery. Focusing on transforming itself into international competitive one-station solution provider of intelligent conveying system, providing not only intelligent products but also whole cycle management from construction to operation & service for our customers.Our company located in HangZhou city in North China Plain, it’s the cross road of ZheJiang ,ZheJiang and ZheJiang . We have more than 800 units advanced manufacturing equipments, including 20 large and main units and 3 automatic production lines. The factory covers 253,000 square meters. It’s registered capital is 71,550,00 USD, There are more than 300 employees which contains 30 with middle-level titles and 125 technical workers with high technical skills. Xinriseng is mainly engaged in the manufacture, sales and technical services of belt conveyors, large angle belt conveyors, horizontal curved belt conveyors and long distance crossing conveyors. Our products can be used in metallurgy, building materials, electric power, coal, port and other industries, products have been covered the whole domestic market, and exported to the United States, Germany, France and other EU countries, Australia, Brazil, along the Belt and Road countries, Southeast Asian countries and African emerging markets, totally more than 50 countries, gained the customers’ praise.Our company has a number of provincial innovative platforms, relying on the technological radiation, constantly strengthens exchanges and cooperation with scientific research institutes. We have successively formed school-enterprise partnerships with China University of Mining, ZheJiang University, ZheJiang Materials Handling Research Institute, HangZhou University of Architecture and Technology, keeping the conveyor design at the leading level in China. At the same time, our technical team regularly carries out technical exchanges and discussions with foreign companies, learning international leading design concepts and process methods, and keeps pace with international new technologies.With the innovative technology, good quality, CHINAMFG has established a one-stop service system. We will continue adhering to “servingthe users, making contributions to society”, make our company a flagship of conveying industry with international competitiveness. All in all, our company will provide the best products with high quality and competitive price for our customers and share success with you together.

 

  /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Certification: CE, ISO
Pulley Sizes: Type F
Manufacturing Process: Casting
Material: Carbon Steel
Surface Treatment: Polishing
Application: Chemical Industry, Grain Transport, Mining Transport, Power Plant
Customization:
Available

|

Customized Request

grooved pulley

How do you select the right grooved pulley for a specific industrial application?

Selecting the right grooved pulley for a specific industrial application involves considering several factors to ensure optimal performance and reliability. Here are the steps to guide you in the selection process:

1. Identify the Application Requirements:

– Determine the specific application requirements, including the type of machinery or equipment where the pulley will be used, the power transmission needs, speed requirements, and environmental conditions (such as temperature and humidity).

2. Determine the Belt Type:

– Identify the type of belt that will be used with the grooved pulley, such as V-belt, flat belt, timing belt, or poly-V belt. Each belt type has specific dimensions, profiles, and load-bearing capabilities, and the pulley must be compatible with the belt to ensure efficient power transmission.

3. Calculate Power Requirements:

– Determine the power requirements of the system, including the torque or horsepower that needs to be transmitted. This information is crucial for selecting a grooved pulley with the appropriate size, groove profile, and material construction to handle the required power load.

4. Consider Speed Ratio:

– If the application requires a specific speed ratio between the driving and driven pulleys, calculate the desired speed ratio. This information will help in selecting the pulley sizes and groove profiles that will achieve the required speed ratio.

5. Evaluate Space Constraints:

– Assess the available space for installing the grooved pulley system. Consider the diameter and width of the pulley, as well as any clearance requirements. Ensure that the selected pulley can fit within the available space without interfering with other components or causing alignment issues.

6. Assess Environmental Factors:

– Take into account the environmental conditions in which the pulley will operate. Factors such as temperature extremes, moisture, dust, or exposure to chemicals may require selecting a pulley made from specific materials or with protective coatings for enhanced durability and resistance to corrosion or wear.

7. Consult Manufacturer’s Recommendations:

– Refer to the manufacturer’s guidelines, specifications, and recommendations for the specific grooved pulley types and sizes suitable for your application. Manufacturers often provide detailed information on the load-bearing capacity, speed limits, and other performance characteristics of their pulleys.

8. Consider Specialized Features:

– Evaluate if any specialized features are required for your application. This could include crowned pulleys for belt tracking, idler pulleys for belt guidance, or adjustable pulleys for variable speed applications. Select a pulley that offers the necessary features to optimize performance and reliability.

9. Verify Compatibility:

– Double-check the compatibility between the selected grooved pulley and the belt, ensuring that they have matching profiles, dimensions, and load capacities. This step is crucial to prevent slippage, premature wear, or damage to the belt or pulley.

10. Review Cost and Availability:

– Consider the cost and availability of the chosen grooved pulley. Compare prices from different suppliers and assess the availability of spare parts or replacements to ensure long-term support for your industrial application.

By following these steps and considering the specific requirements of your industrial application, you can select the right grooved pulley that will provide efficient power transmission, reliable performance, and extended service life.

grooved pulley

How do grooved pulleys impact the performance of industrial drives and motors?

Grooved pulleys play a significant role in the performance of industrial drives and motors. They contribute to the efficiency, power transmission capabilities, and overall reliability of the systems. Here’s a detailed explanation of how grooved pulleys impact the performance:

1. Power Transmission:

Grooved pulleys are crucial components in power transmission systems. They are designed to work in conjunction with belts, such as V-belts or timing belts, to transmit power from the motor to driven components. The grooves in the pulleys provide a secure grip on the belt, ensuring optimal power transfer and minimizing slippage. This efficient power transmission results in improved overall system performance.

2. Belt Traction and Grip:

The grooves in the pulleys create contact points with the belt, enhancing traction and grip. This is particularly important in applications where high torque or heavy loads are involved. The grooved design helps prevent belt slippage, ensuring that the rotational motion from the motor is effectively transferred to the driven components. The improved traction provided by grooved pulleys enhances the efficiency and reliability of industrial drives and motors.

3. Load Distribution:

Grooved pulleys aid in distributing the load evenly across the width of the belt. The V-shaped grooves in grooved pulleys help to center the belt and ensure that the load is evenly distributed, reducing stress concentration on specific points. This balanced load distribution minimizes wear and fatigue on the belt, pulleys, and other components, resulting in extended service life and improved performance.

4. Belt Tracking and Alignment:

The grooves in grooved pulleys help guide and track the belt, ensuring proper alignment. The V-shaped grooves provide a self-centering mechanism, keeping the belt in the correct position and preventing it from wandering or slipping off the pulley. Proper belt tracking and alignment are crucial for smooth operation, reduced vibrations, and minimized wear on the belt and pulley surfaces.

5. Speed Ratio and Torque:

The size and configuration of the grooved pulleys can be used to control the speed ratio and torque in the power transmission system. By selecting pulleys with different diameters or groove profiles, the speed ratio between the motor and driven components can be adjusted. This allows for customization of the system to meet specific speed or torque requirements, optimizing the performance for different applications.

6. Noise and Vibration Reduction:

Grooved pulleys contribute to reducing noise and vibrations in industrial drives and motors. The proper alignment and grip provided by the grooves minimize belt slippage and associated vibrations. This results in smoother operation and reduced noise levels, creating a more comfortable working environment and minimizing the potential for damage or wear on surrounding equipment.

7. Overload Protection:

Grooved pulleys can act as a point of overload protection in power transmission systems. In the event of sudden load spikes or excessive torque, the belt may slip within the grooves of the pulley, absorbing the excess energy and preventing damage to the motor or driven components. This overload protection mechanism helps safeguard the system and prolong its lifespan.

8. Maintenance and Serviceability:

Grooved pulleys are designed for easy maintenance and serviceability. Belt replacement or adjustments can be performed more efficiently due to the grooved design, which facilitates quick installation and removal of the belt. This reduces downtime during maintenance activities and contributes to overall system productivity.

In summary, grooved pulleys have a significant impact on the performance of industrial drives and motors. They ensure efficient power transmission, enhance belt traction and grip, facilitate load distribution and belt alignment, allow for speed and torque control, reduce noise and vibration levels, provide overload protection, and offer convenient maintenance and serviceability. By selecting the appropriate grooved pulleys and optimizing their design, the performance, reliability, and longevity of industrial drives and motors can be greatly improved.

grooved pulley

What are the benefits of using grooved pulleys in various systems?

Grooved pulleys, also known as V-groove pulleys, offer several benefits when used in various systems. Here’s a detailed explanation of the advantages of using grooved pulleys:

1. Efficient Power Transmission:

Grooved pulleys contribute to efficient power transmission by providing increased belt traction. The V-shaped grooves in the pulleys create multiple contact points with the belt, improving the grip and minimizing slippage. This enhanced traction ensures reliable power transfer without loss due to slipping, resulting in efficient power transmission and optimal performance of the system.

2. Reduced Belt Wear:

The design of grooved pulleys helps to distribute the load more evenly across the belt’s surface. As a result, stress concentrations on specific points of the belt are minimized, reducing the risk of belt wear and prolonging its lifespan. By reducing belt wear, grooved pulleys contribute to lower maintenance costs and increased system reliability.

3. Belt Alignment and Tracking:

Grooved pulleys assist in maintaining proper belt alignment and tracking. The V-grooves guide the belt, keeping it centered on the pulley during operation. This alignment feature helps prevent belt wandering or slipping off the pulley, even under varying loads or conditions. Proper belt alignment and tracking result in smooth and consistent power transmission, minimizing energy losses and improving overall system efficiency.

4. Versatility and Compatibility:

Grooved pulleys are designed to be versatile and compatible with various belt types and sizes. They can accommodate different V-belts, V-ribbed belts, timing belts, or even flat belts, allowing for flexibility in selecting the appropriate pulley for specific power transmission requirements. This versatility ensures efficient power transmission across a wide range of applications and industries.

5. Vibration Damping:

Grooved pulleys contribute to vibration damping in power transmission systems. The V-grooves help dampen vibrations that can occur during power transmission, reducing the associated noise and potential damage to the system. By minimizing vibrations, grooved pulleys contribute to smoother operation and improved power transmission efficiency.

6. Cost-Effective Solution:

Using grooved pulleys can be a cost-effective solution for power transmission systems. The improved belt traction and reduced slippage provided by grooved pulleys minimize power loss, resulting in more efficient energy utilization. This can lead to cost savings in terms of reduced energy consumption and improved overall system performance.

7. Wide Range of Applications:

Grooved pulleys find applications in various industries and systems, including automotive, industrial machinery, HVAC, conveyor systems, and more. Their versatility and compatibility with different types of belts make them suitable for a wide range of power transmission requirements. Whether it’s transmitting power in an engine, driving a conveyor belt, or operating a ventilation system, grooved pulleys offer reliable and efficient performance.

In summary, the benefits of using grooved pulleys in various systems include efficient power transmission, reduced belt wear, belt alignment and tracking, versatility and compatibility, vibration damping, cost-effectiveness, and suitability for a wide range of applications. These advantages make grooved pulleys a preferred choice in many power transmission systems.

China Best Sales Belt Conveyor Device Transmission Parts Pulley Manufacturers Direct Supply   engine pulleyChina Best Sales Belt Conveyor Device Transmission Parts Pulley Manufacturers Direct Supply   engine pulley
editor by CX

2024-04-09