China factory Belt Conveyor Device Transmission Parts Pulley Manufacturers Direct Supply wholesaler

Product Description

 

Product Description

Drive pulley
The driving drum is the main component of transmitting power.

Dt-ii drive drum according to the load capacity is divided into light, medium and heavy 3 types, drum diameter of 500, 630, 800, 1000mm. with

A roller has several different shaft diameters and center spans for selection.

1) Light: bearing aperture is 80 ~ 100mm, shaft and wheel hub are single key connection, drum is a single plate welded structure, one-way shaft.

2) Medium: bearing aperture is 120 ~ 180mm, shaft and hub are single key connection, there are 2 kinds of one-way and two-way exit shaft

3) Heavy duty: bearing aperture is 200 ~ 220mm, expansion sleeve connection is cast welding cylinder structure.

The surface of the roller is covered with smooth steel, herringbone and CHINAMFG pattern rubber. Herringbone pattern rubber surface friction number, good drainage, but directional,

When installing the herringbone tip should be consistent with the conveyor belt running direction. The conveyor running in both directions should use a CHINAMFG pattern. For important occasions, be sure to Coated with vulcanized rubber; For flame-retardant, flameproof occasions should be used corresponding explosion-proof. Bearing seats are all lubricated with oil cup grease.

Bend pulley

It is used to change the running direction of the conveyor belt or increase the wrapping Angle of the conveyor belt on the transmission drum, and its structural form is divided into light, medium and heavy

Three types, the shaft of the grade diameter of 50 ~ 100mm,120 ~ 180mm and 200 ~ 260mm, the surface of the drum has bare light

Steel surface and smooth rubber surface two.

Drive device: by motor, reducer, high speed shaft coupling or hydraulic coupling, brake, low speed shaft coupling and backstop composed of drive single

The yuan is fixed on the drive frame, and the drive frame is fixed on the foundation.

 

Detailed Photos

Product Parameters

Certifications

Packaging & Shipping

Installation Instructions

Drive pulley and Bend pulley

(1) The roller should check the grease in the bearing seat before installation to ensure that the bearing is filled with lithium grease and the bearing seat is filled with grease

The amount 2/3 of the empty fat volume.

(2) When the transmission drum is a chevron groove surface, pay attention to the direction of the groove should be consistent with the running direction of the conveyor belt to prevent transmission

The conveyor runs off, and is conducive to trench drainage and sewage.

(3) Necessary protective measures shall be taken in the hoisting process, and the rubber surface of the roller shall not be damaged.

(4) During installation, the roller can be adjusted by adding gaskets under the cylinder bearing seat and adjusting screws on the frame

The cylinder position ensures that the axis and center first conform to the formula range listed in Table 14.


 

Company Profile

HangZhou CHINAMFG Intelligent Conveying System Co.,Ltd (abbreviated as CHINAMFG Intelligent) is the High-end Conveying Equipment brand , with excellent technical team and in house intellectual property & national patents,developing intelligent conveying machinery. Focusing on transforming itself into international competitive one-station solution provider of intelligent conveying system, providing not only intelligent products but also whole cycle management from construction to operation & service for our customers.Our company located in HangZhou city in North China Plain, it’s the cross road of ZheJiang ,ZheJiang and ZheJiang . We have more than 800 units advanced manufacturing equipments, including 20 large and main units and 3 automatic production lines. The factory covers 253,000 square meters. It’s registered capital is 71,550,00 USD, There are more than 300 employees which contains 30 with middle-level titles and 125 technical workers with high technical skills. Xinriseng is mainly engaged in the manufacture, sales and technical services of belt conveyors, large angle belt conveyors, horizontal curved belt conveyors and long distance crossing conveyors. Our products can be used in metallurgy, building materials, electric power, coal, port and other industries, products have been covered the whole domestic market, and exported to the United States, Germany, France and other EU countries, Australia, Brazil, along the Belt and Road countries, Southeast Asian countries and African emerging markets, totally more than 50 countries, gained the customers’ praise.Our company has a number of provincial innovative platforms, relying on the technological radiation, constantly strengthens exchanges and cooperation with scientific research institutes. We have successively formed school-enterprise partnerships with China University of Mining, ZheJiang University, ZheJiang Materials Handling Research Institute, HangZhou University of Architecture and Technology, keeping the conveyor design at the leading level in China. At the same time, our technical team regularly carries out technical exchanges and discussions with foreign companies, learning international leading design concepts and process methods, and keeps pace with international new technologies.With the innovative technology, good quality, CHINAMFG has established a one-stop service system. We will continue adhering to “servingthe users, making contributions to society”, make our company a flagship of conveying industry with international competitiveness. All in all, our company will provide the best products with high quality and competitive price for our customers and share success with you together.

 

  /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Certification: CE, ISO
Pulley Sizes: Type F
Manufacturing Process: Casting
Material: Carbon Steel
Surface Treatment: Polishing
Application: Chemical Industry, Grain Transport, Mining Transport, Power Plant
Customization:
Available

|

Customized Request

grooved pulley

How do you select the right grooved pulley for a specific industrial application?

Selecting the right grooved pulley for a specific industrial application involves considering several factors to ensure optimal performance and reliability. Here are the steps to guide you in the selection process:

1. Identify the Application Requirements:

– Determine the specific application requirements, including the type of machinery or equipment where the pulley will be used, the power transmission needs, speed requirements, and environmental conditions (such as temperature and humidity).

2. Determine the Belt Type:

– Identify the type of belt that will be used with the grooved pulley, such as V-belt, flat belt, timing belt, or poly-V belt. Each belt type has specific dimensions, profiles, and load-bearing capabilities, and the pulley must be compatible with the belt to ensure efficient power transmission.

3. Calculate Power Requirements:

– Determine the power requirements of the system, including the torque or horsepower that needs to be transmitted. This information is crucial for selecting a grooved pulley with the appropriate size, groove profile, and material construction to handle the required power load.

4. Consider Speed Ratio:

– If the application requires a specific speed ratio between the driving and driven pulleys, calculate the desired speed ratio. This information will help in selecting the pulley sizes and groove profiles that will achieve the required speed ratio.

5. Evaluate Space Constraints:

– Assess the available space for installing the grooved pulley system. Consider the diameter and width of the pulley, as well as any clearance requirements. Ensure that the selected pulley can fit within the available space without interfering with other components or causing alignment issues.

6. Assess Environmental Factors:

– Take into account the environmental conditions in which the pulley will operate. Factors such as temperature extremes, moisture, dust, or exposure to chemicals may require selecting a pulley made from specific materials or with protective coatings for enhanced durability and resistance to corrosion or wear.

7. Consult Manufacturer’s Recommendations:

– Refer to the manufacturer’s guidelines, specifications, and recommendations for the specific grooved pulley types and sizes suitable for your application. Manufacturers often provide detailed information on the load-bearing capacity, speed limits, and other performance characteristics of their pulleys.

8. Consider Specialized Features:

– Evaluate if any specialized features are required for your application. This could include crowned pulleys for belt tracking, idler pulleys for belt guidance, or adjustable pulleys for variable speed applications. Select a pulley that offers the necessary features to optimize performance and reliability.

9. Verify Compatibility:

– Double-check the compatibility between the selected grooved pulley and the belt, ensuring that they have matching profiles, dimensions, and load capacities. This step is crucial to prevent slippage, premature wear, or damage to the belt or pulley.

10. Review Cost and Availability:

– Consider the cost and availability of the chosen grooved pulley. Compare prices from different suppliers and assess the availability of spare parts or replacements to ensure long-term support for your industrial application.

By following these steps and considering the specific requirements of your industrial application, you can select the right grooved pulley that will provide efficient power transmission, reliable performance, and extended service life.

grooved pulley

How does the groove shape and size affect the pulley’s performance?

The groove shape and size of a pulley have a significant impact on its performance in power transmission systems. Here’s a detailed explanation of how the groove shape and size affect the pulley’s performance:

1. Belt Grip and Traction:

The shape and size of the groove play a crucial role in providing adequate belt grip and traction. The groove shape is typically V-shaped, and its angle determines the contact area between the pulley and the belt. A deeper and wider groove with a steeper angle increases the contact area, enhancing the grip and traction between the pulley and the belt. This improved grip minimizes slippage and ensures efficient power transfer.

2. Belt Alignment:

The groove shape and size influence the alignment of the belt on the pulley. The shape of the groove, whether it is symmetric or asymmetric, affects the positioning of the belt. A properly designed groove shape helps guide the belt and keep it aligned on the pulley during operation. This alignment feature prevents belt wandering or slipping off the pulley, supporting smooth and consistent power transmission.

3. Load Distribution:

The groove shape and size also contribute to load distribution across the belt’s surface. A wider and deeper groove provides a larger contact area with the belt, allowing for better load distribution. This even distribution of the transmitted load reduces stress concentrations on specific points of the belt, minimizing the risk of belt failure and ensuring efficient power transmission.

4. Belt Wear:

The groove shape and size can impact belt wear. A properly designed groove shape distributes the contact forces more evenly on the belt, reducing localized wear. The size of the groove, specifically its width and depth, should be appropriate for the belt size to prevent excessive wear. Improper groove dimensions can cause accelerated belt wear, leading to reduced belt lifespan and potential system failures.

5. Belt Flexibility:

The groove shape and size can affect the flexibility of the belt. The groove dimensions should match the belt’s thickness and flexibility to ensure proper fit and prevent excessive bending or deformation of the belt. If the groove is too narrow or shallow, it may restrict the belt’s movement and flexibility, leading to increased friction and wear. On the other hand, an oversized groove may cause the belt to sit loosely, compromising power transmission efficiency.

6. Noise and Vibration:

The groove shape and size can impact the generation of noise and vibrations in the power transmission system. A well-designed groove shape helps to dampen vibrations that can occur during power transmission, reducing noise and potential damage to the system. The size of the groove can also influence the noise level. If the groove is too narrow, it may cause excessive noise due to increased friction between the belt and the pulley.

7. Belt Type Compatibility:

The groove shape and size should be compatible with the specific type of belt used in the power transmission system. Different types of belts, such as V-belts, V-ribbed belts, or timing belts, have specific requirements for groove shape and size. Ensuring the proper groove dimensions for the specific belt type is essential to achieve optimal performance and prevent premature belt failure.

In summary, the groove shape and size of a pulley significantly impact its performance in power transmission systems. These factors influence belt grip and traction, belt alignment, load distribution, belt wear, belt flexibility, noise and vibration levels, as well as compatibility with the belt type. Proper design and selection of the groove shape and size are crucial for achieving efficient and reliable power transmission.

grooved pulley

What types of belts or cables are typically employed with grooved pulleys?

Grooved pulleys, also known as V-groove pulleys, are commonly used in conjunction with specific types of belts or cables. Here’s a detailed explanation of the typical belts or cables employed with grooved pulleys:

1. V-belts:

V-belts are one of the most commonly employed types of belts used with grooved pulleys. These belts have a trapezoidal cross-section that matches the V-shaped grooves in the pulleys. V-belts are made of rubber or synthetic materials and are flexible, allowing them to fit into the grooves of the pulleys. They provide reliable power transmission and are widely used in various applications, including automotive engines, industrial machinery, HVAC systems, and more.

2. V-Ribbed Belts:

V-ribbed belts, also known as serpentine belts or multi-rib belts, are another type of belt commonly used with grooved pulleys. These belts have a flat or slightly curved cross-section with ribs running along their length. The grooved pulleys for V-ribbed belts have multiple grooves, matching the ribs on the belt. V-ribbed belts are often used in applications where high power transmission is required, such as automotive engine systems, industrial machinery, and HVAC systems.

3. Timing Belts:

Timing belts, also called toothed belts or synchronous belts, are used in applications that require precise synchronization of the pulleys. These belts have teeth or notches on the inner surface that mesh with corresponding grooves on the pulleys. Timing belts are commonly employed in engines, camshaft drives, conveyor systems, and other applications where accurate timing and synchronization are crucial for proper operation.

4. Flat Belts:

While grooved pulleys are primarily designed for V-belts or V-ribbed belts, they can also be used with flat belts in certain applications. Flat belts have a rectangular cross-section and do not have grooves or teeth. However, grooved pulleys can still be used with flat belts by providing a flat contact surface. Flat belts are used in various applications, including power transmission, conveyor systems, and light-duty machinery.

5. Wire Rope or Cable:

In certain specialized applications, grooved pulleys can be employed with wire rope or cable. The grooves in these pulleys are designed to accommodate the specific diameter and shape of the wire rope or cable, providing a secure grip. This configuration is commonly used in lifting and hoisting systems, cranes, winches, and other applications where wire rope or cable is used to transmit force or lift heavy loads.

It is important to note that the selection of the appropriate belt or cable for use with grooved pulleys depends on the specific requirements of the application, including power transmission capacity, load, speed, and environmental conditions. Manufacturers and suppliers of grooved pulleys typically provide compatibility information and guidelines regarding the suitable types and sizes of belts or cables to be used with their pulleys.

In summary, the typical belts or cables employed with grooved pulleys include V-belts, V-ribbed belts, timing belts, flat belts, and wire rope or cable. The choice of the belt or cable depends on the specific application and the requirements of the power transmission system.

China factory Belt Conveyor Device Transmission Parts Pulley Manufacturers Direct Supply   wholesaler China factory Belt Conveyor Device Transmission Parts Pulley Manufacturers Direct Supply   wholesaler
editor by CX

2024-05-14