China OEM Belt Conveyor Pulley/Drum Pulley/Drum Roller, Rubber Roller, Steel Pulley double pulley

Product Description

Belt Conveyor Pulley/Drum Pulley/Drum Roller, Rubber Roller, Steel Pulley

Type Belt width(mm) Standard Diameter(mm) Length(mm)
Drive pulley 500 500 Length of the pulley depends on the belt width of the conveyor
650 500~630
800 630~1000
1000 800~1150
1200 800~1150
1400 1000~1350
1600 1150~1600
1800 1150~1800
2000 1350~2000
2200 1600~2200
2400 1800~2400
Bend pulley 500 250~500
650 250~630
800 250~1000
1000 250~1600
1200 250~1600
1400 315~1600
1600 400~1600
1800 400~1600
2000 500~1600
2200 630~1600
2400 800~1600

 

1.)Pipe: seamless steel : it was precisely cut by using the flame cutting machine.

2.)The sleeve & disc :it was cut by using the laser cutter machine precisely.

 

3.)Shaft: We chose 45# round steel & sleeve and process the whole shaft so that it ensures shaft concentricity and reduction for the eccentric shaft force. It make sure the pulley move more stable

4.)Bearing set & bearing: high-quality bearing which is hot charging and bearing block are equipped inner bearing enlargement device, so the bearing can be easily pushed to the bearing position  and it avoids the bearing damage from the beating.

Testing for the pulley

We have the professional testing machine for the pulley.    We need make the eliminating inner stress treatments when the pulley’s withstand forces exceed 80KN and we will make the static  balance inspection when the belt speed exceeds 2.5m/s.  
And we laso make the Drum dynamic balance test for the pulley to confirm the good quality before sent to the customer.

Packing:
After all the goods tested then make the packing, then the goods put into the warehouse to wait to send to the customer
Our projects:
Exhitbition and the customer visiting~
We also attend many kinds of related exhibitations to know more our products for the customer. Such as Canton fair, buma fair andother minging fairs.
Our company and products get the customer approve and many customer vist us and make the orders for us.

Company certificate &honor
We have the ISO 9001 certification The products have gained various patents. For example: Trademarks, patents,ects.

After sale service
We provide the customer best after sale services, and we solve the problems any time.

The company introduction:
 HangZhou CHINAMFG conveying Machinery Co.,Ltd was founded in 2005.      
It’s registered capital is 11.68million CNY and It is private joint-stock enterprise. Our main products are cnoveyor roller,idler,frame, pulley,belt and belt conveyor system for TD75 ,DTII,DTIIA,CEMA ects.
we has large lathes, numerical control, double pressing machine, double welding machine, double boring lathe, milling machine, sawing machine and so on. The products have gained various patents. We can produce more than 1 thousand rollers and 10 pulleys per day.
We have the professionalQC dept. to keep the good quality before the goods sent out. The products are sold to Middle East,Africa ,Australia,Europe,Southeast Asia,Russia and some other countries and regions. We will Strengthen the inner management and improve our products’ quality constantly.We will offer the best products for customers from the beginning to the end.


FAQ

1.Q: Your bearing type and brand usually use? 
 A:Large ball bearing type deep ball bearing withSRB, and according to customer’s requirements. 

2.Q: How is your Payment Term? 
A: T/T or L/C. Another payment term we can also discuss. 

3.Q: Can you customize it? 
A: We support customization according to your request. 

4.Q: What’s the MOQ? 
A: 3 piece. 

5.Q: What’s the production capacity of your conveyor pulley? 
20 pcs/day.

6.Q: What’s your roller’s lifetime?
Our pulley have a long lifetime with good performance and usually
make sure 30000 to 50000 hours under the normal site and operation.

Contact us: 
Contact person: Sunny Li
 

 

Material: Carbon Steel
Surface Treatment: Baking Paint
Installation: Horizontal
Welding: Submerged Arc Welding
Balance Treatment: Dynamic Equilibrium and Static Equilibrium
Structure: Tube, Shaft, Self-Aligning Bearing, Bearing Seat
Customization:
Available

|

Customized Request

grooved pulley

How do grooved pulleys impact the overall efficiency of machinery and equipment?

Grooved pulleys play a crucial role in enhancing the overall efficiency of machinery and equipment in various industries. Their impact can be attributed to several key factors:

1. Efficient Power Transmission:

– Grooved pulleys, when paired with compatible belts, enable efficient power transmission from the driving source (such as an electric motor or engine) to the driven component. The grooves on the pulley ensure proper engagement with the belt, minimizing slippage and maximizing power transfer. This efficient power transmission reduces energy losses and improves the overall efficiency of the machinery or equipment.

2. Reduced Friction and Wear:

– The grooves on the pulley create a positive engagement with the belt, distributing the load evenly and reducing friction between the belt and the pulley. This reduces wear and tear on the belt and the pulley surfaces, leading to extended service life and improved efficiency by minimizing energy losses due to friction.

3. Enhanced Belt Traction:

– The grooves on the pulley provide increased belt traction. This is particularly important in applications where high torque or heavy loads are involved. The enhanced belt traction ensures that the belt maintains a firm grip on the pulley, preventing slipping and ensuring reliable power transmission. This results in improved efficiency and performance of the machinery or equipment.

4. Precise Speed Control:

– Grooved pulleys, when used in conjunction with compatible belts and variable speed drives, enable precise speed control of driven components. By changing the position of the belt on the pulley or adjusting the pulley size, the speed ratio can be modified, allowing for fine-tuning of the machinery or equipment’s operation. This precise speed control contributes to overall efficiency, as it facilitates optimal performance and prevents unnecessary energy consumption.

5. Versatility and Adaptability:

– Grooved pulleys offer versatility and adaptability in various applications. They can accommodate different types of belts, such as V-belts, flat belts, timing belts, or poly-V belts, allowing for flexibility in design and application. This versatility enables the use of grooved pulleys in a wide range of machinery and equipment, contributing to overall efficiency by providing suitable power transmission solutions for diverse industrial needs.

6. Maintenance and Reliability:

– Grooved pulleys are generally low-maintenance components. Once properly installed and aligned, they require minimal attention. This reduces downtime and maintenance costs associated with machinery or equipment. Additionally, grooved pulleys are known for their durability and reliability, ensuring consistent performance over extended periods. Reliable operation and reduced maintenance contribute to improved efficiency by minimizing disruptions and optimizing productivity.

By incorporating grooved pulleys into machinery and equipment, manufacturers and designers can achieve improved power transmission, reduced energy losses, enhanced traction, precise speed control, and overall operational efficiency. These factors collectively contribute to increased productivity, reduced operating costs, and improved performance in a wide range of industrial applications.

grooved pulley

What maintenance procedures are necessary to ensure the reliability of grooved pulleys?

Maintaining grooved pulleys is essential to ensure their long-term reliability and optimal performance. Proper maintenance procedures help prevent premature wear, minimize downtime, and extend the lifespan of the pulleys. Here’s a detailed explanation of the maintenance procedures necessary to ensure the reliability of grooved pulleys:

1. Regular Inspection:

Perform regular visual inspections of grooved pulleys to identify any signs of wear, damage, or misalignment. Check for cracks, corrosion, excessive wear on the grooves or belt contact surfaces, and any abnormalities in the pulley structure. Inspect the pulleys for proper alignment and ensure that they are securely mounted. Early detection of any issues allows for timely corrective actions, reducing the risk of failures or system downtime.

2. Belt Tension Checks:

Monitor the tension of the belts connected to the grooved pulleys regularly. Proper belt tension is crucial for efficient power transmission and to prevent slippage. Use appropriate tension measuring tools or follow manufacturer’s recommendations to ensure the belts are within the specified tension range. Loose or excessively tight belts can lead to reduced performance, increased wear on pulleys and belts, and potential belt failure.

3. Belt Cleaning and Lubrication:

Clean the belts and grooved pulleys periodically to remove dirt, debris, and built-up residues. Use a suitable belt cleaning solution and follow manufacturer’s guidelines for belt cleaning procedures. Lubricate the grooved pulleys, if necessary, with a compatible lubricant to reduce friction and wear. Avoid over-lubrication, as excessive lubricant can attract more dirt and debris, leading to accelerated wear.

4. Belt Replacement:

Monitor the condition of the belts connected to grooved pulleys and replace them when signs of wear, cracking, fraying, or other damage are observed. Over time, belts can stretch, lose their tension, or deteriorate due to environmental factors or operational stresses. Replace the belts with compatible ones of the correct size, type, and specifications as recommended by the manufacturer.

5. Pulley Alignment:

Ensure proper alignment of grooved pulleys to prevent belt misalignment, excessive wear, and premature failure. Misaligned pulleys can cause the belts to run off-track and lead to reduced power transmission efficiency and increased stress on the pulleys and belts. Use alignment tools or techniques such as laser alignment to align the pulleys accurately, following manufacturer’s guidelines.

6. Pulley Cleaning and Inspection:

Clean the grooved pulleys regularly to remove any accumulated dirt, dust, or debris. Use a brush or compressed air to clean the grooves, ensuring that they are free from obstructions that can affect belt traction. Inspect the grooves for signs of wear, damage, or material buildup. Remove any foreign objects or buildup that may hinder the proper functioning of the pulleys.

7. Check for Pulley Runout:

Inspect the grooved pulleys for runout, which refers to any wobbling or eccentric movement of the pulley during rotation. Excessive runout can cause belt tracking issues, uneven wear, and increased stress on the pulleys and belts. Use dial indicators or other measurement tools to check for runout and take corrective measures if necessary, such as pulley replacement or adjustment.

8. Environmental Considerations:

Consider the environmental conditions in which the grooved pulleys operate and take appropriate measures to protect them. For example, in dusty environments, install protective covers or enclosures to prevent the ingress of dust and debris. In corrosive environments, use pulleys made from corrosion-resistant materials or apply suitable coatings to enhance their resistance to corrosion.

9. Record Keeping:

Maintain records of maintenance activities, including inspection dates, belt replacements, alignment checks, and any repairs or adjustments made to the pulleys. This documentation helps establish a maintenance history and facilitates tracking the performance and condition of the grooved pulleys over time. It also serves as a reference for future maintenance and troubleshooting purposes.

10. Manufacturer’s Guidelines:

Follow the manufacturer’s guidelines, recommendations, and specifications for maintenance procedures specific to the grooved pulleys being used. Manufacturers often provide detailed instructions regarding maintenance intervals, lubrication requirements, cleaning methods, and other important considerations. Adhering to these guidelines ensures that the maintenance procedures are performed correctly and in line with the manufacturer’s recommendations.

In summary, maintaining the reliability of grooved pulleys requires regular inspection, proper belt tension checks, belt cleaning and lubrication, timely belt replacements, pulley alignment, pulley cleaning and inspection, checking for pulley runout, considering environmental conditions, maintaining maintenance records, andfollowing the manufacturer’s guidelines. By implementing these maintenance procedures, you can ensure that grooved pulleys operate reliably, minimize the risk of failures, and optimize their performance and lifespan.

grooved pulley

How do grooved pulleys contribute to the efficient transmission of power?

Grooved pulleys, also known as V-groove pulleys, play a crucial role in facilitating the efficient transmission of power in various mechanical systems. Here’s a detailed explanation of how grooved pulleys contribute to the efficient transmission of power:

1. Increased Belt Traction:

One of the primary advantages of grooved pulleys is their ability to provide enhanced belt traction. The V-shaped grooves in the pulleys create multiple contact points with the belt, increasing the friction and grip between them. This improved traction prevents belt slippage, even under high loads or torque. The increased traction ensures efficient power transfer without loss due to slipping, resulting in more reliable and effective power transmission.

2. Optimal Grip and Contact Area:

The design of grooved pulleys is precisely engineered to match the corresponding V-belts or V-ribbed belts. The angle and depth of the grooves are designed to optimize the grip and contact area between the pulley and the belt. This ensures maximum surface contact between the pulley and the belt, allowing for efficient transfer of power. The increased contact area minimizes stress concentrations and allows for the distribution of the transmitted power more evenly, reducing the risk of belt wear and prolonging the life of both the belt and the pulley.

3. Belt Alignment and Tracking:

Grooved pulleys assist in belt alignment and tracking, which further enhances power transmission efficiency. The V-grooves guide the V-belt or V-ribbed belt, helping to keep it centered on the pulley. This alignment feature reduces the chances of the belt wandering or slipping off the pulley, even during operation under varying loads or conditions. Proper alignment and tracking result in a smooth and consistent power transmission, minimizing energy losses and improving overall efficiency.

4. Load Distribution:

Grooved pulleys aid in distributing the load evenly across the belt’s surface. As the belt sits within the grooves, the contact area between the belt and the pulley increases. This broader contact area allows for better load distribution, reducing stress concentration on specific points of the belt. By distributing the load more uniformly, grooved pulleys minimize the risk of belt failure and ensure efficient power transmission throughout the system.

5. Reduced Slippage and Power Loss:

Due to the enhanced traction and grip provided by the grooved pulleys, the risk of belt slippage is significantly reduced. Belt slippage can result in power loss and decreased efficiency in power transmission systems. Grooved pulleys minimize slippage, ensuring that the transmitted power is effectively transferred from the driving pulley to the driven pulley. This leads to improved overall system efficiency and reliable operation.

6. Vibration Damping:

Grooved pulleys can contribute to vibration damping in power transmission systems. The V-grooves help dampen vibrations that can occur during power transmission, reducing the associated noise and potential damage to the system. By minimizing vibrations, grooved pulleys contribute to smoother operation and improved power transmission efficiency.

7. Versatility and Compatibility:

Grooved pulleys are designed to be versatile and compatible with various belt types and sizes. They can accommodate different V-belts or V-ribbed belts, allowing for flexibility in selecting the appropriate pulley for specific power transmission requirements. This versatility ensures efficient power transmission across a wide range of applications and industries.

In summary, grooved pulleys contribute to the efficient transmission of power through increased belt traction, optimal grip and contact area, belt alignment and tracking, load distribution, reduced slippage and power loss, vibration damping, and versatility. These design features and advantages make grooved pulleys essential components in power transmission systems, ensuring reliable and efficient operation.

China OEM Belt Conveyor Pulley/Drum Pulley/Drum Roller, Rubber Roller, Steel Pulley   double pulley	China OEM Belt Conveyor Pulley/Drum Pulley/Drum Roller, Rubber Roller, Steel Pulley   double pulley
editor by CX

2023-09-27