China wholesaler Grooved Drum/Belt Conveyor Pulley/China Brass Pulley pulley and belt

Product Description

 HangZhou Port Shipbuilding & Machinery Industry Co.,ltd, a wholly owned subsidiary of ZheJiang Port Equipment Group ,is a large comprehensive state-owned company combining industrial products research and manufacture, steel structure and equipment producing, general contracting service for industrial system integration and ships & equipment building and maintenance.

 

As a member of the Standardization Administration of China/Technical Committee (SAC/TC331) , the company owns the production qualification for transport machinery, Grade-I Class III Production Qualification of steel general ships, Grade-I Production Qualification of steel fishing vessels; Grade-I Professional Contracting Qualification of steel structure, and kinds of Professional contracting qualifications for electrical and mechanical equipment installation, corrosion protection and insulation engineering, foundation, etc. The company also occupies Class B Design Qualification of steel fishery vessels and the Design & Construction Qualification of marine fishery platforms registered with the Ministry of Agriculture. The main business scope of RPIC covers ports, marine equipment, mining, electric power; cement, metallurgy; paper making and other various industries.

Product Introduction

   The drum is the main component that transmits power. It is divided into 3 types according to their load-carrying capacity: light, medium and heavy.

 Light: Bearing aperture 80-100mm, the shaft and hub are single-width plate welded cylinder structure connected by single key.
 Medium: Bearing aperture 120-180mm, the shaft and hub are expansion sleeve connection.

 Heavy: Bearing aperture 200-220mm, the shaft and hub are expansion sleeve connection, and the drum body is cast-welded structure.   

Product Description

    Conveyor pulley stays at 2 ends of belt machine. The pulley can be divided into 2 categories: Driving pulley and averting pulley, driving pulley is the main part for transmitting the power and there are 2 kinds of pulley sets: Smooth surface and rubber surface, and rubber surface can be classified into smooth rubber surface, herringbone rubber surface and CHINAMFG rubber surface to meet different technical requirements. Averting pulley can be classified into smooth rubber surface and smooth steel surface.

 

Main Equipment & Facilitys

 

Project Performance

Packaging & Shipping

 

                                       Our EPC Conveying System Project

                                               Customer Visit & Exhibition

                                                 
                                                Company Certificate

FAQ

  Q1:Can you send samples?

A:Of course, we can provide customers with free samples but customer should pay the courier fee.

Q2:What product information do I need to provide?

A:Please kindly provide the grade, width, thickness, surface treatment requirement  and quantities you need to purchase.

Q3:What is your terms of payment ?

A: 30% T/T in advance ,balance before shipment or 100% LC at sight.

Q4.Do you provide customer made Products service?

A: Yes,if you have your own design , we can produce according to your specification and drawing.

Q5:How long does your delivery time take?

A:In general, our delivery time is within 7-15 days, and may be longer if the quantity is extremely large or special circumstances occur.

Q6: How many countries you already exported to?

A:We have exported to America, Canada, Brazil, Chile, Colombia, Thailand, Myanmar, Vietnam,  and other African countries.Our export experience is rich, we familiar with different market demands, can help customers avoid a lot of trouble.

Q7:Can I go to your factory to visit?

A:Of course, we welcome customers from all over the world to visit our factory.

Q8:Does the product have quality inspection before loading?

A:Of course, all our products are strictly tested for quality before packaging,  customers can appoint third parties to inspect the products before loading too.

Q9:How to pack the products?

A: Standard export sea-worthy packaging, the inner layer has a waterproof paper outer layer with iron packaging and is fixed with a fumigation wooden pallet. It can effectively protect products from corrosion and various climate changes during CHINAMFG transportation.

Q10:What is your working time?

A:In general, our online service time is ZheJiang time: 8:00-22:00, after 22:00, we will reply to your inquiry in the coming working day.

 

Shipping Cost:

Estimated freight per unit.



To be negotiated
Material: Carbon Steel
Surface Treatment: Polishing
Motor Type: Frequency Control Motor
Customization:
Available

|

Customized Request

grooved pulley

Can grooved pulleys be used in DIY projects and home improvement tasks?

Yes, grooved pulleys can be used in DIY (do-it-yourself) projects and home improvement tasks to enhance functionality, create mechanical systems, or improve efficiency. Here are some examples of how grooved pulleys can be utilized in DIY and home improvement applications:

1. Mechanical Systems:

– DIY Conveyor Belt: Grooved pulleys can be used to create a small-scale conveyor belt system for moving objects or materials within a DIY workshop or project. By attaching grooved pulleys to a frame and threading a compatible belt, you can easily transport items from one location to another.

– Garage Door Opener: Grooved pulleys can be employed in DIY garage door opener systems. By integrating grooved pulleys with a motorized mechanism and a timing belt, you can create a simple and efficient way to open and close your garage door.

2. Mechanical Advantage:

– DIY Block and Tackle System: Grooved pulleys can be utilized in a block and tackle system to create a mechanical advantage for lifting heavy objects. By arranging multiple grooved pulleys and a rope or cable, you can reduce the amount of force required to lift or lower objects, making it easier to handle loads in DIY projects or home renovations.

3. Home Appliances:

– DIY Clothesline: Grooved pulleys can be incorporated into a DIY clothesline system. By installing grooved pulleys at appropriate locations and using a durable rope or line, you can create a convenient method for hanging and drying clothes outdoors.

– Window Blinds or Curtains: Grooved pulleys can be employed in DIY window blinds or curtain systems. By attaching grooved pulleys to the window frame and threading a cord or chain, you can create a mechanism to easily raise or lower blinds or curtains, providing privacy and light control.

4. Exercise Equipment:

– DIY Pulley System for Strength Training: Grooved pulleys can be used in DIY pulley systems for strength training or rehabilitation exercises. By mounting grooved pulleys to a sturdy frame and using cables or ropes with handles, you can create a versatile and adjustable resistance training system at home.

5. Art Installations:

– Kinetic Sculptures: Grooved pulleys can be incorporated into DIY kinetic sculptures or interactive installations. By utilizing grooved pulleys with various diameters and attaching them to movable components, you can create visually appealing and dynamic artworks that respond to external forces or user interaction.

When using grooved pulleys in DIY projects and home improvement tasks, it is essential to ensure proper installation, alignment, and tension of the belts or ropes. Additionally, always prioritize safety by following best practices, using appropriate materials, and considering weight limits and load-bearing capacities.

By leveraging grooved pulleys in DIY projects and home improvement tasks, you can add functionality, mechanical advantage, and efficiency to your creations and make your home projects more enjoyable and rewarding.

grooved pulley

What maintenance procedures are necessary to ensure the reliability of grooved pulleys?

Maintaining grooved pulleys is essential to ensure their long-term reliability and optimal performance. Proper maintenance procedures help prevent premature wear, minimize downtime, and extend the lifespan of the pulleys. Here’s a detailed explanation of the maintenance procedures necessary to ensure the reliability of grooved pulleys:

1. Regular Inspection:

Perform regular visual inspections of grooved pulleys to identify any signs of wear, damage, or misalignment. Check for cracks, corrosion, excessive wear on the grooves or belt contact surfaces, and any abnormalities in the pulley structure. Inspect the pulleys for proper alignment and ensure that they are securely mounted. Early detection of any issues allows for timely corrective actions, reducing the risk of failures or system downtime.

2. Belt Tension Checks:

Monitor the tension of the belts connected to the grooved pulleys regularly. Proper belt tension is crucial for efficient power transmission and to prevent slippage. Use appropriate tension measuring tools or follow manufacturer’s recommendations to ensure the belts are within the specified tension range. Loose or excessively tight belts can lead to reduced performance, increased wear on pulleys and belts, and potential belt failure.

3. Belt Cleaning and Lubrication:

Clean the belts and grooved pulleys periodically to remove dirt, debris, and built-up residues. Use a suitable belt cleaning solution and follow manufacturer’s guidelines for belt cleaning procedures. Lubricate the grooved pulleys, if necessary, with a compatible lubricant to reduce friction and wear. Avoid over-lubrication, as excessive lubricant can attract more dirt and debris, leading to accelerated wear.

4. Belt Replacement:

Monitor the condition of the belts connected to grooved pulleys and replace them when signs of wear, cracking, fraying, or other damage are observed. Over time, belts can stretch, lose their tension, or deteriorate due to environmental factors or operational stresses. Replace the belts with compatible ones of the correct size, type, and specifications as recommended by the manufacturer.

5. Pulley Alignment:

Ensure proper alignment of grooved pulleys to prevent belt misalignment, excessive wear, and premature failure. Misaligned pulleys can cause the belts to run off-track and lead to reduced power transmission efficiency and increased stress on the pulleys and belts. Use alignment tools or techniques such as laser alignment to align the pulleys accurately, following manufacturer’s guidelines.

6. Pulley Cleaning and Inspection:

Clean the grooved pulleys regularly to remove any accumulated dirt, dust, or debris. Use a brush or compressed air to clean the grooves, ensuring that they are free from obstructions that can affect belt traction. Inspect the grooves for signs of wear, damage, or material buildup. Remove any foreign objects or buildup that may hinder the proper functioning of the pulleys.

7. Check for Pulley Runout:

Inspect the grooved pulleys for runout, which refers to any wobbling or eccentric movement of the pulley during rotation. Excessive runout can cause belt tracking issues, uneven wear, and increased stress on the pulleys and belts. Use dial indicators or other measurement tools to check for runout and take corrective measures if necessary, such as pulley replacement or adjustment.

8. Environmental Considerations:

Consider the environmental conditions in which the grooved pulleys operate and take appropriate measures to protect them. For example, in dusty environments, install protective covers or enclosures to prevent the ingress of dust and debris. In corrosive environments, use pulleys made from corrosion-resistant materials or apply suitable coatings to enhance their resistance to corrosion.

9. Record Keeping:

Maintain records of maintenance activities, including inspection dates, belt replacements, alignment checks, and any repairs or adjustments made to the pulleys. This documentation helps establish a maintenance history and facilitates tracking the performance and condition of the grooved pulleys over time. It also serves as a reference for future maintenance and troubleshooting purposes.

10. Manufacturer’s Guidelines:

Follow the manufacturer’s guidelines, recommendations, and specifications for maintenance procedures specific to the grooved pulleys being used. Manufacturers often provide detailed instructions regarding maintenance intervals, lubrication requirements, cleaning methods, and other important considerations. Adhering to these guidelines ensures that the maintenance procedures are performed correctly and in line with the manufacturer’s recommendations.

In summary, maintaining the reliability of grooved pulleys requires regular inspection, proper belt tension checks, belt cleaning and lubrication, timely belt replacements, pulley alignment, pulley cleaning and inspection, checking for pulley runout, considering environmental conditions, maintaining maintenance records, andfollowing the manufacturer’s guidelines. By implementing these maintenance procedures, you can ensure that grooved pulleys operate reliably, minimize the risk of failures, and optimize their performance and lifespan.

grooved pulley

Can you explain the design features and advantages of grooved pulleys?

Grooved pulleys, also known as V-groove pulleys, are designed with specific features that offer several advantages in various applications. Here’s a detailed explanation of the design features and advantages of grooved pulleys:

1. Groove Configuration:

Grooved pulleys feature one or more grooves along their circumference. These grooves are typically V-shaped, although there are variations such as double V-grooves or multi-groove configurations. The V-shaped grooves are precision-engineered to match the corresponding V-belts or V-ribbed belts. The angle and depth of the grooves are designed to optimize the grip and contact area between the pulley and the belt, ensuring efficient power transmission.

2. Belt Traction:

One of the key advantages of grooved pulleys is their ability to provide enhanced belt traction. The V-grooves create multiple contact points between the pulley and the belt, increasing the friction and grip. This improved traction prevents belt slippage, which is especially important in applications with high loads, torque, or speed. The increased traction ensures reliable power transmission and reduces the risk of power loss or inefficiency.

3. Alignment and Tracking:

Grooved pulleys assist in belt alignment and tracking. The V-grooves guide the V-belt or V-ribbed belt, helping to keep it centered on the pulley. This alignment feature reduces the chances of the belt wandering or slipping off the pulley, even during operation under varying loads or conditions. Proper alignment and tracking lead to smooth and consistent power transmission, minimizing vibrations and extending the lifespan of both the belt and the pulley.

4. Load Distribution:

The grooves in grooved pulleys aid in distributing the load evenly across the belt’s surface. As the belt sits within the grooves, the contact area between the belt and the pulley increases. This broader contact area allows for better load distribution, reducing stress concentration on specific points of the belt. The even load distribution helps prevent premature wear and damage to both the belt and the pulley, enhancing their longevity and reliability.

5. Noise Reduction:

Grooved pulleys can contribute to noise reduction in mechanical systems. The V-grooves help dampen vibrations and minimize noise generated during power transmission. The belt’s secure grip within the grooves reduces the chances of belt slippage and the associated noise. This feature is particularly beneficial in applications where a quiet operating environment is desired, such as in residential or commercial settings.

6. Versatility:

Grooved pulleys are available in various sizes and configurations, making them versatile for different applications. Whether it’s a single-groove pulley for light-duty applications or a multi-groove pulley for heavy-duty industrial systems, there are options to accommodate specific belt requirements and power transmission needs. This versatility allows grooved pulleys to be used in a wide range of industries, including automotive, manufacturing, HVAC, and more.

7. Maintenance and Replacement:

When it comes to maintenance and replacement, grooved pulleys offer convenience. The design allows for easy belt installation and removal. V-belts or V-ribbed belts can be quickly placed within the grooves or removed when necessary, simplifying maintenance tasks and reducing downtime. Additionally, grooved pulleys are readily available in the market, making it convenient to find replacements when needed.

In summary, the design features and advantages of grooved pulleys include their groove configuration optimized for specific belts, enhanced belt traction, alignment and tracking assistance, load distribution capabilities, noise reduction properties, versatility for different applications, and convenience in maintenance and replacement. These features make grooved pulleys reliable and efficient components for power transmission systems, contributing to smooth operation, extended belt and pulley life, and overall system performance.

China wholesaler Grooved Drum/Belt Conveyor Pulley/China Brass Pulley   pulley and belt	China wholesaler Grooved Drum/Belt Conveyor Pulley/China Brass Pulley   pulley and belt
editor by CX

2023-10-04